Bajaj Finserv App on rooted Android devices generally results in the occurrence of security errors since the apps employ protection mechanisms of a higher level. Nevertheless, if you have the right configuration and tools, you can remove these limitations and still run the Bajaj Finserv app on any rooted Android phone without any hindrance. This comprehensive guide of step by step instructions will enable you to set up your rooted device in such a way that it will not be detected and also allow smooth app operation.
🚨 Important Precaution: Take a Full Backup First
Prior to executing any of the options mentioned below, make sure that a full backup of your device is done via NANDroid with custom recovery (e.g., TWRP). Due to the fact that these steps require changes at the system level, there is a possibility that app behavior, boot processes, or system stability may be affected.
✅ Step-by-Step Guide to Bypass Root Detection in Bajaj Finserv App
1. Root Device with KernelSU or KernelSU Next
Root your device via KernelSU or KernelSU Next for the best compatibility with advanced root-hiding modules:
- Manually or via recovery, flash the KernelSU-supported kernel.
- Install the APK of KernelSU Manager.
- Make sure the root is enabled.
2. Flash SUSFS Module via KernelSU Manager
- Go to the sections Modules in KernelSU Manager.
- Get the SUSFS module and flash it.
- After rebooting the device, continue with usage.
- Make sure that the module is working by checking /proc area.
SUSFS enables dynamic root hiding and app-specific isolation crucial for bypassing deep root scans.
3. Install and Configure Hide My Applist
It is a root-hiding app of high power that is especially designed for those apps, which are written or in any other way, they get information about the rooted environment.
Steps:
- Download and install Hide My Applist (HMA).
- Give root and ADB access permissions.
- Create a new profile and name it “BajajFinserv”.
- If your Magisk or KernelSU supports, then go to the settings and turn on Zygisk Mode.
- Make an exclusion list with the following apps: org.altruist.BajajExperiacom.google.android.gms (optional for full isolation)
- org.altruist.BajajExperia
- com.google.android.gms (optional for full isolation)
4. Pass Device Integrity (at Minimum)
Apply Play Integrity Fix module or Universal SafetyNet Fix to get through:
- Device Integrity
- (Optionally) Basic and Strong Integrity
Get these either from Magisk Modules or KernelSU-compatible. To check your status, the YASNAC app can be used.
5. Create custom.pif.json File for Play Integrity Spoofing
In order for the spoofing of the Play Integrity checks to be successful, a suitable custom.pif.json is needed:
For example:
{
"basicIntegrity": true,
"deviceIntegrity": true,
"strongIntegrity": false
}7. Clear Data of Google Play and Banking Apps
To reset detection cache:
- Head to Settings > Apps > See All Apps.
- Force stop and clear storage of the following: Google Play ServicesGoogle Play StoreGoogle Services FrameworkBajaj Finserv app
- Google Play Services
- Google Play Store
- Google Services Framework
- Bajaj Finserv app
8. Reboot Your Device
Once you have done all these things:
- Restart the device completely.
- Allow the device to get optimized.
- Open Bajaj Finserv app.
- You should no longer receive the root detection message
📦 Tools and Packages Required
| Tool/App | Purpose | Required |
|---|---|---|
| KernelSU / KernelSU Next | Root environment with module support | ✅ |
| SUSFS Module | App-specific root hiding | ✅ |
| Hide My Applist | Blacklist and stealth mode | ✅ |
| Play Integrity Fix | Pass device integrity checks | ✅ |
| TrickyStore | Advanced app cloaking | ✅ |
📱 Verified Working on the Following Devices
- Pixel 6/6a/7 running Android 14
- OnePlus 8T/9R with custom kernel + KernelSU
- Samsung Galaxy S20/S21 (non-Knox
If your device supports KernelSU or Magisk with Zygisk, these steps are replicable.
🔐 Troubleshooting Tips for Using Bajaj Finserv App
| Issue | Solution |
|---|---|
| App crashes at launch | Verify Hide My Applist blacklist and kernel support |
| Still detects root | Check target.txt and SUSFS module activation |
| Device Integrity fails | Regenerate custom.pif.json or use latest fix module |
| Play Store shows uncertified | Reinstall GMS + clear framework data |
🧩Final Notes
In this guide, the author outlines a method that is comprehensive and can be replicated to run the Bajaj Finserv app on rooted Android devices. The root cloaking and deeply system customization are the main techniques used in these methods, which have shown to be effective in several banking and financial apps. Not only do these methods help you get around detection but they also keep the system clean and usable.
Seeking assistance? Try being a part of such communities as XDA Developers or discuss platforms on GitHub with those who talk about Hide My Applist, KernelSU, and Play Integrity fixes. Or if anyone have query with above Bajaj Finserv App guide then ask them below.